- When I started I actually just wanted to make the 2 red lines the same length. see PR-pic
- Ultimately I was able to harmonize all ctrls sizes and position for all rc's.
- This does also fix text truncation and overflows in several rc's.
- Also this prevents the numbers (actual data) in some rc's to be cut off much earlier than in others,
e.g. hu-HU.rc had IDC_KERNEL_MEMORY_PAGED width just 33 which is very small and will lead to quick truncation.
Now all languages use width 45 for all data fields and width 57 for all text fields,
which means if truncation would ever happen with very large numbers in the 64bit era,
we will see that happen in all rc's at the same moment and not arbitrarily scattered over a century.
It will happen later after this PR is applied.
- After this PR the two red lines do have the same length. see PR-pic
- After this PR the two green lines do have the same length. see PR-pic
- After this PR the two yellow lines do have the same length. see PR-pic
- After this PR the four brown lines do have the same length. see PR-pic
- After this PR the five cyan lines do have the same length. see PR-pic
Display the class icons for the installed network components.
Also fixes a bug where the selection change whacked the checkbox of the first item.
Use 0x7fffffff to append the item at the end of the list, as optimization.
- Handling ADN_DEL_IF_EMPTY is critical to avoid data loss.
- SetFileAttributesW failing is not fatal, the delete might still succeed.
NOTE: Not in Wine yet.
- Fix TCHAR/WCHAR mis-usage,
- Fix as a result, a buffer overflow (GlobalAlloc takes the size in
bytes, but a number of characters was passed to it instead).
- Remove usage of unsafe string function. Now the item text is directly
retrieved within the allocated buffer.
- Adds support for registry controlled menu separators and the documented
values to turn off verbs.
- Adds support for CMF_OPTIMIZEFORINVOKE, CMF_NODEFAULT, CMF_DONOTPICKDEFAULT,
CMF_EXPLORE and CMF_DISABLEDVERBS.
Bugs fixed:
- A verb with "Extended" set in the registry could cause the menu to invoke
the incorrect command! This happened because skipping InsertMenuItemW
caused InvokeCommand to use the wrong index with m_StaticEntries.
- Uses IS_INTRESOURCE instead of HIWORD to check if something is a string
(only matters on 64-bit).
- TryToBrowse leaking a PIDL when calling ILCombine.
Notes:
- This PR introduces the RosGetProcessEffectiveVersion() helper function
discussed in chat.
- Relaxed FAILED_UNEXPECTEDLY to FAILED in two places because IContextMenu
cannot assume that it has a site that leads to IShellBrowser.
This adds support for more of the FOLDERSETTINGS FOLDERFLAGS.
- Turned on LVS_EX_DOUBLEBUFFER even though there is no setting for it.
XP has it on for folders but not the desktop and this matches that.
Vista might turn it on for its shadow labels on the desktop, further
investigation required.
- Fixes a bug where LVS_EX_SNAPTOGRID was incorrectly assigned where
the WS_EX flags go.
- LVS_AUTOARRANGE seems to be incorrectly forced on but for compatibility
I decided to leave it but added a comment. The existing code already
has the check for FWF_AUTOARRANGE.
This finishes the 640x480-ification within [NETCFGX]. All dlgs addressed now.
- Allows the final 3 property sheets IDD_TCPIP_ADVIP_DLG, IDD_TCPIP_ADVDNS_DLG and IDD_TCPIP_ADVOPT_DLG to be displayed fine in 640x480 screen resolution by limiting their dlg unit height to 220
- tweaks a bit of the controls vertical positions to look better, e.g. LTEXT "interface metric:" was moved one pix upwards relative to IDC_METRIC to make that look more vertically centered
- IDC_AUTOMETRIC checkbox was moved slightly upwards in relation to the groupbox it was embedded into, which does it make look slightly better
- width of IDC_SUFFIX was enlarged for all languages to the value that was historically chosen for uk-UA.rc. (Only ru-RU.rc continues to do that differently, as it uses even longer text and therefore has to shift 2 controls towards the left to make that fit into the dlg. That part was there also before this PR)
This prevents the code from linking to __imp_*, which would pull in the symbol from the import library (e.g. kernel32), which creates problems with the GNU linker, which doesn't like to have the import and a static definition at the same time.
Main goal was making the dlg display well in 640x480 resolution.
Since the dialogs in that propsheet had very different sizes between the languages
that was a lot of work. Now all of the propsheet-dlgs are harmonized in size to 252x220.
Also I found a way to align some controls in a way that they are more immune
to differing languages lengths for specific strings, so we can currently
to 100% use the same controls dimensions and positions also,
which is a very nice trait. I double-checked all dialogs visually in ResHacker
for all languages (except no-NO.rc for technical reasons), and they do look all
very well like that. The slider for the alarms dlg I enlarged in x,
it has 100 distinct positions, so a larger slider helps the user
not having to position the mouse extremely accurate.
I also fixed various typos, and several places where text cutoff occurred for many languages,
too many to name them all.
Some dummy-strings "unknown" I changed to "?" instead.
That still allows to see its position in a previewer,
but does not lure all the translators into translating that nonsense,
and therefore keeps the rcs better in sync. It also shrinks binary size.
Both dialogs can easily fit 640x480, like their twins from XPSP3 and 2k3sp2
For IDD_TCPIP_BASIC_DLG we can achieve that by just shrinking the upper groupbox in height by 10 units, and then move all controls below that by 10 units upwards. That doesn't require much brain, only diligence.
For IDD_TCPIP_ALTCF_DLG it is even easier, because the dlgs contents are small enough yet to still fit 640x480, so only the dlg itself must be shrinked for now. Later if more stuff will be added, we can perform pretty easy still by just moving everything a bit upwards. But we can leave that for later.
Fix a common typo in a 3rd dlg regarding a missing space before "(in order)". I decided to put that into this PR, because I didn't touch that dlgs dimensions yet. So the change is not mixed with position changes and therefore the review remains simple.
For ja-JP.rc fix a
-FONT 8, "MS Shell Dlg"
to
+FONT 9, "MS UI Gothic"
- adds 3 missing accelerators for zh-CN.rc, zh-HK.rc, zh-TW.rc for IDC_SHOWTASKBAR
- shrinks the dialog in y to fit on a 640x480 screen, like the XPSP3 and 2k3sp2 dlgs do
- for that some controls positions have to be slightly moved up (which cannot lead to text truncation here, guaranteed)
- only 3 controls change in size:
- IDC_COMPONENTSLIST gets 3 units smaller in height, but is still larger than in XPSP3/2k3sp2. So it is still large enough
- IDC_NETCARDNAME shrinks a bit in width, but is still larger than in XPSP3/2k3sp2, so what fits there will also fit for us
- pushbutton IDC_CONFIGURE is slightly increased in width for all languages because that looks better
except ru-RU.rc (which had the largest width) it is slightly smaller now, but still large enough.
We can use the same width here now for all rcs!
- strip the lorem ipsum text from IDC_DESCRIPTION, which is never supposed to be displayed. That syncs all rcs in that line and slightly shrinks the binary size and fixes CORE-19284.
- add a FIXME comment for a missing accelerator in sv-SE.rc
*as a consequence all rcs do now use the exact same positions and sizes for all controls again, YIPPIE!*
The only exception that the dlg had before from that rule, was the ru-RU.rc IDC_CONFIGURE was larger in x.
But now that is not needed anymore.
George explained that this is supposed to fail like that,
aka "works as designed". So let's at least mute this now,
as it is spammed with every taskmgr refresh cycle
and allows me to reduce logfile-sizes from ~50MB back to ~2MB
when building ros on ros.
err:(dll/win32/advapi32/wine/security.c:309) NtOpenProcessToken failed! Status c0000022.
Fixes CORE-18521
Also strip some EOL-whitespace in the file, and slightly improve the header.
Based on KRosUser's aclui.patch. The list view will automatically delete the image list.
Don't delete the image list in DestroySecurityPage function.
CORE-19187
because George is having an open Draft PR since July 2022,
which might also touch this file on master in some years.
And it ofc is easier for me to revert my work now, then for him to
go through the great lengths of merging his work then.
Tries now to map the "License" text set to "Freeware" to the
LICENSE_FREEWARE "LicenseType" so it is translated correctly (LoadString).
Fixes the following:
- If only the "License" field is set in the DB, nothing will change
(this applies to 99% of the current entries in the DB).
- If both "LicenseType" and "License" are set, both will be used
(no observable change in behavior): "Open Source (GPL v2)" etc.
- If only "LicenseType" is set, it will now display just the type
"Freeware" instead of "Freeware ()".
This is done only for "Freeware", because the others (the open source ones)
have many variations. "OpenSource", "Open Source", "Open Source (GPL)" etc.
On Windows the Network connections folder uses a binary value
and someone forgot about Little Endian when converting it to a DWORD.
Addendum to 7eb3fcf1d (r66485). CORE-9276
This issue has not been very visible because of bugs in CRegFolderEnum.
- Convert icons/*_cur.ico to the cursor files (*.cur).
- The hot spot is (16, 16) (default).
- Rename icons/ folder as img/.
- Use LoadCursorW instead of LoadIconW
for cursors.
- Use CURSOR statements for cursor files
instead of ICON statements in rsrc.rc.
- I used GIMP to convert the icon files to the PNG files.
- I used RealWorld Cursor Editor to convert the PNG files to the cursor files.
CORE-19297
The Copy-To-File feature had some bugs that the user couldn't save.
- Modify SelectionModel::GetSelectionContents.
- Delete SelectionModel::CopyBitmap, SelectionModel::LockBitmap,
and SelectionModel::UnlockBitmap functions.
CORE-19186
Reduce code and binary size a bit. This will reduce 1024 bytes in binary.
Unify ToolBase::OnFinishDraw and ToolBase::OnCancelDraw to ToolBase::OnEndDraw.
CORE-19094
and move debug.h after all includes. Addendum to 60b0afc3a (PR #5818)
dsound_new: Addendum to 5974fe1 (r45584).
hdaudbus: Addendum to cf7fc81 (r68311).
- Respect the toggle key settings.
- Change the hot key settings in
base/setup/lib/mui.c.
- Revert IntDefWindowProc function about
Alt+Shift handling.
- Delete some code in
co_IntProcessKeyboardMessage for Alt+Shift
handling.
- Add IntGetNextKL, IntLanguageToggle, and
IntCheckLanguageToggle helper functions.
- Modify ProcessKeyEvent and
UserGetLanguageToggle functions to
support [Left Alt]+Shift and Ctrl+Shift.
- Improve WM_INPUTLANGCHANGEREQUEST
handling.
- Message handling shouldn't access kbswitch
directly.
CORE-10667
bdasup: Addendum to 40c15ec (r46632).
kmixer: Addendum to 3e489bf (r42143).
mmixer: Addendum to c42d9f2 (r44872).
stream: Addendum to 4a0debf (r41662).
Serge plans a follow up that will remove all other remaining YDEBUG in the source tree.
The ones covered here he considered to be the most trivial ones.
Based on KRosUser's patches.
- Add missing version strings "Comments" and
"LegalTrademarks".
- Add version strings "PrivateBuild" and
"SpecialBuild" if necessary.
- Trim the version string for pretty display.
CORE-19270, CORE-19114, CORE-19275
- Use the same keypress 'C' to create either primary or logical partitions.
Their type is automatically determined, whether they are created in
general unpartitioned space, or space within an extended partition.
- Extensively adapt the translations to reflect these changes.
Do not do that yet for extended partitions (containers).
This is possible, because when creating partitions, we do that on
unpartitioned space that is already "tagged" as either being "logical"
or not, and the partition style is inherited from that.
The resulting code is simpler, yet working as it should.
This will also help in the future for supporting other platforms, where
the concept of "primary", "extended" and "logical" partitions do not
exist (basically all platforms except BIOS-based PC-AT).
Unify CREATE_{PRIMARY,EXTENDED,LOGICAL}_PARTITION_PAGE
(i.e. Create{Primary,Extended,Logical}PartitionPage() functions)
into a single CREATE_PARTITION_PAGE (i.e. CreatePartitionPage()).
A lot of code was duplicated there (display, size input, etc.) just
for calling ultimately the Create{Primary,Extended,Logical}Partition()
helper functions.
This will also help in the future for supporting other platforms, where
the concept of "primary", "extended" and "logical" partitions do not
exist (basically all platforms except BIOS-based PC-AT).
- Stay attached while deleting the VAD node
- Acquire the appropriate working set lock when deleting a VAD node
- Both are needed for locking correctness
- Acquire the appropriate working set lock when calling MmLocateMemoryAreaByAddress
- Do not access MemoryArea without holding the lock (otherwise it can be pulled away under our feet)
- Fix range check for paged pool
These faults are handled by ARM³ and we don't need to check for a memory area. They can be recursive faults (e.g. from MiDeleteSystemPageableVm), so we might be holding the WS lock already. Passing it straight to ARM³ allows to acquire the WS lock below to look up the memory area.
- Improve ImageModel::PushImageForUndo.
- Use FormatMessage in newly added
ShowOutOfMemory function.
- Call ShowOutOfMemory() when out of memory.
CORE-19227, CORE-19094
Addendum to commit b3c55b9e6 (PR #4399).
Passing &CapturedObjectName as pointer to be probed and captured would
fail if e.g. PreviousMode == UserMode, since that pointer is always in
kernel space. Instead, pass the original user-mode pointer.
Bug caught by Timo Kreuzer ;)
This fixes icons that should be drawn transparently not showing as such until window gets repainted.
For example, hidden shell folders that are not drawn transparently until the filebrowser window is resized...
CORE-16722
Some of the Menu-controls are just dummies in the RC,
because those controls are dynamically replaced at runtime
based on which tab/propsheet is active in taskmgr.
They are replaced by the IDS_MENU_* strings then.
Deduplicating them has many advantages:
1.) It shrinks binary size:
master taskmgr.exe RosBEWin2.2.2 GCC8.4.0dbg 708.608 -> 696.832 bytes
2.) Translators don't get lured into translating dead stuff,
assuming they translated the menu properly, while in fact they did not.
This is *real*. Happened even to me multiple times already, although
I am actually aware of the design.
3.) Some of them were offsync already between the dummy and the real thing.
4.) It reduces diff between en-US and other rc's.
* Aside of that improve alignment in some languages rcs in the "Shutdown"-menu-section,
* and improve a translation in de-DE, sq-AL, and zh-CN.
* [TASKMGR] id-ID.rc 2 accelerators in the same string is definitely wrong
* [TASKMGR] *.rc, make sure that warning is in all 30 langs, especially in en-US.rc
* [TASKMGR] for several translations add FIXME-comments regarding accelerator collisions
- Introduce AddScreenSaver[Item] helpers for adding screensavers in
the list (either given by file path or by item structure).
- Rename "AddScreenSavers" to "EnumScreenSavers", and
"ScreenSaverItem" type to "SCREEN_SAVER_ITEM".
- Ensure the stored "SCRNSAVE.EXE" value is NULL-terminated.
- Add the current screensaver, specified by the "SCRNSAVE.EXE" registry
value, in the list if it isn't already present; otherwise select it
in the list.
- Make the filename comparison case-insensitive.
CORE-6812 ; see also commit ff0951356 (r66688)
This function "just" changes the per-user SCRNSAVE.EXE registry value
to point to the new specified file, changes the SPI values and opens
the desk.cpl "Screensaver" property tab for letting the user change
the new selected screensaver properties.
In particular, it does *NOT* copy the specified file to System32 or
anything else (and doesn't verify that it is a valid PE executable).
Our previous implementation did none of that, and was also relying on
some private setupapi functions.
We now behave closer to Windows' desk.cpl.
Additionally:
- ReactOS-specific feature (compile-time define) disabled by default:
Verify that the specified file actually exists, before changing
the screensaver.
- Use NDEBUG, disabling DPRINT by default;
- Improve InstallScreenSaver[A,W] spec entries;
- Remove NUM_APPLETS define and use _countof() instead.
These adapters were common in DEC Alpha boxes and they are really rare
nowadays. The 21140 chip is emulated in Connectix / Microsoft Virtual PC
and Hyper-V Gen 1 VM.
This is an experimental driver, not yet tested on real hardware.
CORE-8724
This change allows to properly pass parameters to newer CMake versions. Currently the script passes "VSSolution" and similar on to CMake, which are ignored, but newer CMake will complain. Allows to configure a VSSolution with CMake 3.27.4.
Define _STLP_THREADS to make stl thread safe.
Also remove defined(__BUILDING_STLPORT) from the preprocessor conditions for which STLPInterlockedExchangePointer is defined, because that function is used in _threads.h, which can get included by apps using the stl through stl headers.
- Delete global zoomTo function.
- Add CCanvasWindow::zoomTo and
CCanvasWindow::getNewZoomRect functions.
- Rename CCanvasWindow::updateScrollInfo as
CCanvasWindow::updateScrollRange.
- Rename CCanvasWindow::resetScrollPos as
CCanvasWindow::updateScrollPos.
- Draw the proper zoom rectangle on mouse move.
- Revert the active tool on click when the tool
was Zoom.
CORE-19094
This check doesn't seem to be correct in modern ReactOS. Furthermore, it
actually hadn't been working for a long time until it was uncovered by
the recent system menu changes.
Reverts a hack introduced in 17a315285 (r72517), fixes CORE-19170.
The initial bug described in CORE-2338 is not observed.
Drawing lines smoothly on big image.
- In CCanvasWindow::DoDraw, calculate the
intersection to reduce bits transfer.
- Improve SmoothDrawTool in handling Shift key.
CORE-19094, CORE-19237
This allows to move this choice sooner in the process, thus having all
the user key presses at first, then all the actual installation going
without any key presses needed anymore... (that is, unless you wanted
to install the bootloader on a removable device. Then it will prompt
you there!)
- Additional "cosmetic"/future-proof changes: Rename all instances
of "floppy" in the bootloader install variables to "RemovableDisk"
because it would be great to have this install choice later.
- Layout adjustments in the translated bootloader pages.
- Skip bootloader installation on upgrades. The idea here is that if
we were able to find a ReactOS installation to upgrade, this means
we were able to find a valid bootloader + boot entry.
See also PR #5633.
This logic may be slightly improved in the future to detect whether
the underlying bootloader is FreeLdr and if so, only update its files.
But this is for the future.
In some situations, the scroll position should be reset.
- Add CCanvasWindow::resetScrollPos method.
- Reset the scroll position on loading a file.
- Reset the scroll position on mirroring/rotating
the image.
CORE-19094
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
Co-authored-by: Hermès BÉLUSCA - MAÏTO <hermes.belusca-maito@reactos.org>
- Allow to boot NT kernel on UEFI systems with our 2 primary supported architectures
- Implement remaining code needed to pass execution to x86 and amd64 kernels
CORE-11954
- Initialize the rest of IRP data which is not initialized by IoBuildSynchronousFsdRequest.
- Setup an IO_STACK_LOCATION structure for the IRP before calling the driver's read/write routine.
- Do this for both KsReadFile and KsWriteFile functions in our Kernel Streaming driver (ks.sys).
This fixes several problems when calling these functions from outside, so now they are working correctly, as expected.
Discovered during my audio investigations.
CORE-19232
- Delete CCanvasWindow::drawZoomFrame.
- Invalidate the canvas on mouse move when
the active tool is Zoom tool.
- Add ZoomTool::OnDrawOverlayOnCanvas to
draw the zoom rectangle without flickering.
- Improve the zoom trackbar position.
- Display the zoom rate on changing the value
of the zoom trackbar.
- Reverse the direction of the zoom trackbar.
- Don't draw the focus rectangle.
CORE-19215, CORE-19216
- Only export stdcall annotated functions on x86
- Turn annotated stubs / forwarders into normal exports
- Note: MSVC removes decorated exports / forwarders, as soon as the undecorated version is exported, even when _declspec(dllexport) is used, no idea how to fix that.
We had collisions in many languages.
For most languages (which are derived from en-US) we should use
&Priority
P&roperties
We introduced the collisions during 0.4.15-dev'ing when
MENUITEM ID_PROCESS_PAGE_PROPERTIES
and
MENUITEM ID_PROCESS_PAGE_OPENFILELOCATION
were added.
We verified Win7-en and Win2k3-en to behave as proposed in this PR (R for properties, P for priority).
But *french* Windows (I believe Hermes picture was from WinVista-fr or Win7-fr or Win10-fr maybe) does it differently.
the existing de-DE also has been double-checked to exactly match MS with the accelerators in that menu.
This avoids having desk.cpl depend on a private function that may change
or disappear, and increase the probability of being able to use that CPL
across different Windows versions.
(Note: this pSetupMultiByteToUnicode was one of those whose name changed
between Windows 2000 and XP+)
Addendum to commit 8c4b0c914.
Base ourselves on pSetupIsUserAdmin() and other similar functions in our
codebase. Note that what we are actually interested here, is whether the
current thread runs with Administrator privileges.
(As noticed by contributor 'whindsaks', "Not only is this code simpler,
it now will correctly handle deny-only SIDs in the token!")
This is a hack, because the kernel mode path can incur a recursive page fault with the AddressCreationLock acquired, which would lead to a recursive acquisition, once we do proper locking in MmAccessFault.
To properly fix this the PDE must be made valid, similar to the user mode path, but that is not that simple...
Properly set output buffer length in IO Stack Location of the current IRP, since it is passed to KsProbeStreamIrp when calling KsStreamIo, so it fails if the length isn't set properly.
Don't set an input buffer length and the buffer itself, since it isn't passed anywhere, so setting it makes no sense. Moreover, MSDN says that for IOCTL_KS_READ/WRITE_STREAM, only output buffer (and its length) is needed to be set, but not an input one. So it indeed is more correct.
It fixes buffer overflow in KsProbeStreamIrp when attempting to perform the streaming via KsStreamIo. I discovered this bug during my audio refactoring from PR #4660.
This mostly reverts commit 221f21c62 (r29328), that was a hack for
building with MSVC. We can nowadays correctly link with the shell32
SHCreatePropSheetExtArrayEx() export.
The scroll info was not updated when the file is loading.
- Rename CCanvasWindow::Update as CCanvasWindow::updateScrollInfo.
- Update scroll info on ImageModel::NotifyImageChanged.
- Improve ImageModel::ClearHistory.
CORE-19094
They can be spammy. Also clarify these debug prints, because some people
think that "failed to grant access rights" means there's something wrong
in the core access check functions.
Temporarily add the local group to the system token so that Virtualbox
GA services can properly set up network drives for shared folders.
What happens is that a security descriptor has a DACL with only one ACE
that grants access to Local SID (presumably coming from Vbox?)
but the client token is that of the service which is a SYSTEM token.
Perhaps we are not impersonating the right user or whatever else.
This is only a temporary placebo, until a proper solution is found.
CORE-18250
Certain apps such as AIM installer passes an empty generic mapping (this can
be understood with their generic masks set to 0) and our code tries to map
the access right from an ACE with the mapping provided by AccessCheck.
This can lead to a bug where we would not be able to decode the generic right
from an ACE as we need a proper generic mapping in order to do so. A mask
right that is not decoded it cannot be used to mask out the remaining rights,
further resulting into a denied access right.
What Windows does instead is they are mapping the ACE's rights in another place,
presumably when setting security data to an object, and they are using the
generic mapping passed by the kernel.
What we can do for the time being is to temporarily grant access to the client,
but only if they are an administrator.
CORE-18576
- Convert some notations to SAL2
- "Name" parameter in LdrGetProcedureAddress/LdrpGetProcedureAddress should be optional
- "DllCharacteristics" parameter in LdrGetDllHandle should be optional
Taskmgr used a mixture: Sometimes _countof(), sometimes ARRAYSIZE()
and sometimes it calculated the count plain by sizeof(var)/sizeof(TYPE).
Harmonize everywhere to _countof() as it is the shortest solution.
Fix some formatting sins, like placing comments before else-statement.
Shorten the length of some very long line
intentionally *without introducing additional linebreaks* !
Shorten vertical length of some functions to increase their chance to
fit on the screen without scrolling.
Fix wrong indentation level in TaskManagerWndProc().
*.rc: Remove superfluous and redundant comment in all langs
No functional change intended.
I spotted yet another flip:
translation of IDS_TAB_PFDELTA and IDS_TAB_VMSIZE were flipped.
I spotted that by toggling all columns off entirely
in the View-Options dialog where the columns can be selected
and then added only one column at a time. I did that for all options.
I do recommend translators of other langs to do the same test,
I was shocked about the amount of bugs I spotted for german.
And it is very subtle / easy to miss, if you enable/disable multiple columns
together!
Let's call it a day now!
This is an addendum to 0.4.15-dev-413-g ed7196d964
binary size shrinks slightly although that dlg was unused:
taskmgr.exe RosBEWin2.2.2 GCC8.4.0dbg 715.264 -> 708.608
This fixes several issues:
- add a few missing translations, e.g. ID_PROCESS_PAGE_PROPERTIES & ID_PROCESS_PAGE_OPENFILELOCATION
- IDS_TAB_PEAKMEMUSAGE translation was flipped with IDS_TAB_MEMDELTA
- IDC_MEM_USAGE_FRAME had text truncation, fix that by structurally switching to "Speicher"
- waste less space for the listview headers in the Processes tab so user can display more columns conveniently without the headers unnecessarily being crippled to "..."
- Sync some controls sizes back to en-US in the performance tab
- Translation for ID_VIEW_CPUHISTORY_ONEGRAPHALL and ID_VIEW_CPUHISTORY_ONEGRAPHPERCPU was swapped accidentally
- Strip comment lines in the end, which were outdated anyway
- avoid monsters that not even a german person can read like "Auslagerungsdateiauslastungs-Verlaufsanzeige" which is like "Donaudampfschifffahrtselektrizitätenhauptbetriebswerkbauunterbeamtengesellschaft"
- [EXPLORER] Set maximum balloon width for notification area
- [COMCTL32] Fix balloon tooltip shape
- Limit balloon tooltips from extending past the edges of the monitor, not the edges of the work area.
- Instead of simply repositioning the main rectangle when the balloon is too far towards one edge of the screen,
try flipping the balloon the other way. This is the same behavior as Windows Server 2003.
- Tweak some values used to draw the balloon tooltips to more closely follow the Windows balloon tooltip style.
- Removing trailing whitespace.
- While the new changes are guarded, consider cancelling our Wine sync for common controls.
Our common controls are responsible for many graphical issues and lack of features throughout ReactOS.
CORE-19109
Adds the option to set the address edit box to use the display name or the full path. Also refreshes the window title and edit box in all open explorer windows when changing these settings using the folder options dialog.
## PROPOSED CHANGES ##
- Create a new CabinetStateSettings type that inherits from the CABINETSTATE type. This allows us to add additional cabinet state settings not exposed in the CABINETSTATE type as well as adding a Load() method to easily populate the cabinet state settings.
- Add a global cabinet state settings object. While most settings in browseui are stored independently in each shellbrowser window, cabinet state settings are global and apply to every shellbrowser window. This can be confirmed on Windows Server 2003 and Windows 7.
- When receiving the WM_SETTINGCHANGE window message from the folder options dialog, refresh the title of the window and the text in the address edit box. This is the same behavior as Windows Server 2003 and Windows 7.
Add a DWORD registry value to HKCU\...\Explorer\CabinetState\FullPathAddress to allow users to toggle this setting on or off in our folder options.
CORE-9277
It's simpler and only needs to be included once at the beginning of the
header file. It generates an unique identifier for the file automatically,
so maintainers wouldn't need to choose unique names for the macros.
It will be helpful if any future refactoring takes place.
Signed-off-by: Sarthak Roy <sarthakroy2002@gmail.com>
During an open or create procedure of a registry key, the registry parser grabs
a key control block (KCB) from the parser object and uses its information to do the
necessary work in order to obtain a pointer to the newly created or opened registry key.
However, the registry parsers faces several issues. First, we don't do subkey cache cleaning
information against gathered KCBs so whenever we do a registry parse we end up with KCBs
that have cache inconsistencies. Moreover we don't do any locking of whatever KCB we
are grabing during a parse procedure.
=== PROPOSED CHANGES ===
* Implement CmpComputeHashValue and CmpLookInCache functions. With CmpComputeHashValue we can
compute the convkey hashes of each subkey in the path name of a key so we can lock them
with CmpBuildAndLockKcbArray. CmpLookInCache is a function that searches for the suitable
KCB in the cache. The factors that determine if a KCB is "suitable" are:
-- the currently found KCB in the hash list has the same levels as that of the
given KCB from the parse object;
-- The key names from the computed hash values match with the block name of
the KCB;
-- The currently found KCB is not deleted.
The KCB will be changed if the key path name points to a partial match name in
the cache. The KCB from the parse object will be used if we have a full match
of remaining levels.
* Add missing CMP_LOCK_HASHES_FOR_KCB flags on CmpCreateKeyControlBlock calls
that create KCBs during a parse procedure. Such lock has to be preserved until
we're done with the registry parsing.
* On CmpDoCreateChild, preserve the exclusive lock of the KCB when we are
enlisting the key body.
* On CmpDoCreate, make sure that the passed parent KCB is locked exclusively and
lock the hiver flusher as we don't want the flusher to kick in during a key
creation on the given hive. Cleanup the subkey info when we're creating a key
object. Also implement missing cleanup path codes. Furthermore, avoid key
object creation if the parent KCB is protected with a read-only switch.
* Soft rewrite the CmpDoOpen function, namely how we manage a direct open vs
create KCB on open scenario. When a KCB is found in cache avoid touching
the key node. If the symbolic link has been resolved (aka found) then lock
exclusively the symbolic KCB. Otherwise just give the cached KCB to the caller.
If it were for the caller to request a KCB creation, we must check the passed
KCB from the parser object is locked exclusively, unlike on the case above
the caller doesn't want to create a KCB because there's already one in the cache.
We don't want anybody to touch our KCB while we are still toying with it during
its birth. Furthermore, enlist the key body but mind the kind of lock it's been
used.
* On CmpCreateLinkNode, avoid creating a key object if the parent KCB is protected
with a read-only switch. In addition, add missing hive flusher locks for both
the target hive and its child. Cleanup the subkey information of the KCB when
creating a link node, this ensures our cached KCB data remains consistent.
* Do a direct open on CmpParseKey if no remaining subkey levels have been found
during hash computation and cache lookup, in this case the given KCB is the
block that points to the exact key. This happens when for example someone tried
to call RegOpenKeyExW but submitting NULL to the lpSubKey argument parameter.
CORE-10581
ROSTESTS-198
CmpSecurityMethod is a method used by the Object Manager and called by this
subsystem whenever a security operation has to be done against a key object.
As CmpSecurityMethod is a specific OB construct we should not make any direct
call attempts to CmpSecurityMethod, only OB is responsible for that. This fixes
a deadlock where CmpSecurityMethod acquires a push lock for exclusive access
even though such lock is already acquired by the same calling thread in
CmpDoCreateChild.
This prevents a deadlock in DelistKeyBodyFromKCB when we delete a key
object because of an access check failure during a open procedure of a
registry key, as we are already holding a lock against the target KCB of
the key body.
Whenever a security request is invoked into a key object, such as when requesting
information from its security descriptor, the Object Manager will execute
the CmpSecurityMethod method to do the job.
The problem is that CmpSecurityMethod is not aware if the key control block
of the key body already has a lock acquired which means the function will attempt
to acquire a lock again, leading to a deadlock. This happens if the same
calling thread locks the KCB but it also wants to acquire security information
with ObCheckObjectAccess in CmpDoOpen.
Windows has a hack in CmpSecurityMethod where the passed KCB pointer is ORed
with a bitfield mask to avoid locking in all cases. This is ugly because it negates
every thread to acquire a lock if at least one has it.
The CmpUnLockKcbArray, CmpLockKcbArray and CmpBuildAndLockKcbArray routines
help us to lock KCBs within array so that information remains consistent when
we are doing a cache lookup during a parse procedure of the registry database.
Implement CmpBuildAndLockKcbArray and CmpUnLockKcbArray prototypes, we'll gonna need these
to do the locking/unlocking of KCBs stacked up in an array. In addition implement some CM
constructs specifically for cache lookup implementation (more at documentation remarks).
=== DOCUMENTATION REMARKS ===
CMP_SUBKEY_LEVELS_DEPTH_LIMIT -- This is the limit of up to 32 subkey levels
that the registry can permit. This is used in CmpComputeHashValue to ensure
that we don't compute more than the limit of subkeys we're allowed to.
CMP_KCBS_IN_ARRAY_LIMIT -- This is equal to CMP_SUBKEY_LEVELS_DEPTH_LIMIT
plus the addition by 2. This construct is used as a limit of KCB elements
the array can hold. 2 serves as an additional space for the array (one for
the root object and another one as extra space so we don't blow up the stack
array).
CMP_LOCK_KCB_ARRAY_EXCLUSIVE & CMP_LOCK_KCB_ARRAY_SHARED -- These flags are used exclusively
for CmpBuildAndLockKcbArray and CmpLockKcbArray. Their meaning are obvious.
CM_HASH_CACHE_STACK -- A structure used to store the hashes of KCBs for locking. It is named
"stack" because the way we store the hashes of KCBs is within an auxilliary "outer stack array".
CmpAcquireKcbLockSharedByKey can come in handy for use to lock KCBs by their convkey with a shared lock, specifically we would need this for cache lookup stuff.
- Introduce the concept of "brush width" to the
tools model.
- Enable changing the brush width by Ctrl+Plus/Minus
key combination in TOOL_BRUSH.
- Re-define brush styles.
CORE-19094
- Introduce the concept of pen width (not line width) to the tools model.
- Enable changing pen/line width by Ctrl+Plus/Minus key combination in TOOL_PEN,
TOOL_LINE, TOOL_BEZIER, TOOL_RECT, TOOL_SHAPE, TOO_ELLIPSE, and
TOOL_RRECT tools.
CORE-19094
- Stamp the image of the selection when the user clicks on
the selection while holding down the Ctrl key.
- Draw the image of the selection continuously when the user
starts dragging the selection while holding down the Shift key.
CORE-19094
We do use the birth year 1996 instead of 1998
within our msgina pictures already,
and also within the [SDK] for autogenerated file-info.
Since SHELL32 IDD_ABOUT is used by many applications it makes sense to harmonize with that.
Was done already during 0.4.15-dev for SHELL32, but we have to do it again,
since some recent translation PRs to match the en-US.rc again.
Can be observed on the buildbots:
2023-09-17T14:19:34.2051345Z [10663/14808] Building CXX object drivers\wdm\audio\drivers\CMIDriver\cmicontrol\CMakeFiles\cmicontrol.dir\main.cpp.obj
2023-09-17T14:19:34.2052611Z D:\a\reactos\reactos\src\drivers\wdm\audio\drivers\CMIDriver\cmicontrol\main.cpp(818): warning C4267: '=': conversion from 'size_t' to 'unsigned int', possible loss of data
- RtlpQuerySecurityDescriptor: Change argument type of first parameter from PISECURITY_DESCRIPTOR to PSECURITY_DESCRIPTOR, since it handles both absolute and self-relative SDs.
- RtlMakeSelfRelativeSD: rename first parameter from AbsoluteSD to SecurityDescriptor, since it handles both absolute and self-relative SDs.
- SepGetGroupFromDescriptor/SepGetOwnerFromDescriptor/SepGetDaclFromDescriptor/SepGetSaclFromDescriptor: Change parameter type from PVOID to PSECURITY_DESCRIPTOR for clarity.
- While holding down the Shift key, drawing lines with the
pen/brush is limited to either of 8 directions (horizontal/vertical/diagonal).
- s/abs/labs/
CORE-19094
fixes CORE-18967 'Taskbar toolbar - Right click > Open folder fails'
by restoring the code-path we removed with the guilty
0.4.15-dev-3847-g /9b716539182864bc077e362febcda74da50287ed
and add test_sei_lpIDList to shell32:ShellExecuteEx apitest test to protect
that functionality on future attempts to simplify.
Lossless optimization of new png Start button in Lautus style, original by @Splitwirez (ed134bf2, #5540).
Slimmed 464 bytes, ~20% saving. This png is encoded as a grayscale+alpha, so should be tested.
movaps is a 128 bit aligned move, we need a 64 bit unaligned move, so use movsd.
Fixes a crash in oleaut32_winetest tmarshal.
Also add a comment about the use of movd instead of movq.
- Add Ctrl+Plus and Ctrl+Minus accelerators.
- Add IDM_CTRL_PLUS and IDM_CTRL_MINUS
commands.
- Stretch the selection area on IDM_CTRL_PLUS
and IDM_CTRL_MINUS actions.
CORE-19094
- Reduce display of error message on IDM_EDITCOPYTO and IDM_EDITPASTEFROM.
- Introduce LockBitmap/UnlockBitmap mechanism for ImageModel and SelectionModel.
CORE-19181, CORE-19182
Initialize a window's ThreadListEntry as an empty list on creation and only remove the window from the list on destruction, when the entry is not an empty list. Previously the window creation could fail before the list entry was initialized and the window would get destroyed after that, resulting in a NULL pointer dereference.
Create the folder TEMP in X:\reactos so now we can match current livecd
environment variables TMP and TEMP
can be seen as a part of solving CORE-13041
The use-case for that is:
copying the livecd folder structure directly to writable media as USB sticks or memory cards,
will work then out-of-the-box without any other change.
SpareData and SpareLength need to be calculated correctly, as they are used
later in that function as well.
This allows to not overwrite Source UString when writing to Destination UString.
Fixes the problem described in the following JIRA issue, where services could
not start when installing ReactOS in a very-long-named directory.
CORE-18988
Names need decoration (stdcall) in order to be linked.
When using the wsk.h header functions exported therein should
be WSKAPI (which enforces the stdcall calling convention). Linking
would later fail because stdcall functions are named differently in
the object code.
- CDM_SETDEFEXT message handling was a
missing feature of COMDLG32.
- Make info->defext dynamic allocation.
- On CDM_SETDEFEXT handling, replace
info->defext data.
CORE-15020
The type-system is supposed to be our friend, not our enemy.
I pushed this without PR, because the buildbots don't
build the templates by default. That requires
configure -DENABLE_ROSAPPS=1 -DENABLE_ROSAPPS_TEMPLATES=1
So no gain in running them. Greta Thunberg will appreciate the saved CPU-cycles to fight global warming.
I verified it locally to compile without warnings on GCC8.4.0dbg x86
and it follows the same pattern as
0.4.15-dev-6626-g 806da4421c
which passed all the bots successfully. Also the x64 ones.
- comdlg32:filedlg could encounter an assertion error in CWindow::SendMessage.
- Assert the existence of the listview control m_ListView in the CDefView::LV_... function.
- Actually check the existence of m_ListView outside the CDefView::LV_... function.
ROSTESTS-388
Follow-up to #5634.
- Implement CMruBase::_UseEmptySlot.
- Implement CMruLongList and CMruShortList.
- Add CMruClassFactory class and modify
DllGetClassObject function by using it.
- Add shdocvw_apitest.exe.
CORE-9283
According to the results of CImage testcase,
the top byte of the GetPixel() return value is
zero if the return is a valid color.
Do bitwise-AND operation if the color value is valid.
CORE-19008
This will make future syncs between those files much easier,
and fixes tons of mixed tab-space-indentation.
Please no whitespace nitpicks when reviewing this commit, it is a SYNC!
Fixes failing opengl32:sw_extensions test.
The test expects version `1.1.0` which is what Windows reports,
and ReactOS Mesa3D was reporting just `1.1`.
The code was passing 0 instead of SECTION_INHERIT::ViewUnmap (2). 0 isn't even a proper constant to be used here. It worked, because MmMapViewOfSection only compares against ViewShare (1) and treats everything else as ViewUnmap.
The function set CtxSwitchFrame->ApcBypass to FALSE, preventing APCs (like when user mode sets the context while the thread is suspended) from being delivered as soon as the thread lowers IRQL to PASSIVE_LEVEL. This resulted in the SetContext APC to be delivered only after the user mode APC was initialized, overwriting the user mode APC context in the trap frame. This caused kernel32_winetest process to break.
On receiving a zero length response, do not try to print returned text using wine_dbgstr_wn().
Instead check the returned string for zero length and skip the print in that case.
ROSTESTS-377
Now that the Memory Management is a bit more under control again,
and branching releases/0.4.15 is near,
do mute some frequent log-spam that got introduced during 0.4.15-dev'ing
regarding lazy-flushes and MM balancing.
It frequently logged even while being idle.
Slightly improve the headers of the two touched files.
No rocket-science.
- Currently the logo moves around every two seconds. This is not consistent
with Windows Server 2003 (and other versions) and is very distracting.
Increase the interval to every ten seconds, which matches Win2003.
- There are currently two identical copies of the logo bitmap in the
screensaver. Use only one copy of the logo bitmap.
- Shrink the space around the logo bitmap. This should save some disk space
but more importantly allow the logo to reach closer to the edges of the
screen, similar to Win2003.
- Remove unneeded includes.
- They notify, via the "\\Callback\\SetSystemTime" callback, components
of a change of system time (for example, Win32k).
Note, that our Win32k currently does not handle power callouts, so
it isn't affected by these changes (yet).
- NtSetSystemTime(NULL, ...) means "update system time using the current
time-zone information", which is something we don't implement yet.
(And, nothing was previously protecting this call from a NULL parameter...)
- Implement CShellBrowser::GetPropertyBag
a little by using SHGetViewStatePropertyBag.
- Add SHGetPathFromIDListWrapW prototype to
<shlwapi_undoc.h>.
CORE-9283
Indeed, the next SystemTimeToTzSpecificLocalTime() call, when done with
a NULL TIME_ZONE_INFORMATION* 1st parameter, uses the currently active
time zone, which is exactly what the GetTimeZoneInformation() call was
doing.
And note that the original code was incorrectly validating the returned
value from GetTimeZoneInformation() -- the code was assuming the function
returns a boolean, instead of checking for TIME_ZONE_ID_INVALID.
Use a PNG image with alpha channel transparency for the Start button when
compiling Lautus as Vista+ visual style. This serves both as a test case,
and improves appearance when using the taskbar with large icons.
This is prerequisite to supporting Vista+ iteration of the msstyles format,
and also for implementing GetThemeStream() later.
Visual styles compiled for Vista+ can now use PNG images in the IMAGE group.
This does not affect the ability to use BMP images, they can be mixed now.
Add redirections for KdSave/KdRestore and KdD0Transition/KdD3Transition.
Both KDBG and KD(TERM) need those since they will become external
transport DLLs later.
Split KdSendPacket and KdReceivePacket into those that manipulate the
KDBG state proper (reside in kdbg/kdbg.c), and those that deal only with
debug input/output that will reside in a KDTERM "KD Terminal Driver" DLL.
Based on some previous preparatory work by Hervé Poussineau in PR #4600.
(Equivalents of commits 5162bf106 and partly e9bcf7275.)
CORE-18958
Introduce an emergency log-off and restart feature, available when holding
down the control key and selecting "Log Off" or "Shut down" in the MSGINA
Ctrl-Alt-Del security dialog, similar to Windows Server 2003 and newer
Windows versions.
As it turns out, those three functions were duplicating the same code
between each other. Reimplement these in terms of a common helper,
RtlFindExportedRoutineByName().
Indeed: MiFindExportedRoutineByName() was just MiLocateExportName()
but taking a PANSI_STRING instead of a NULL-terminated string.
A similar state of affairs also existed in Windows <= 2003, and the
MS guys also noticed it. Both routines have been then merged and renamed
to MiFindExportedRoutineByName() on Windows 8 (taking a PCSTR instead),
and finally renamed and exported as RtlFindExportedRoutineByName()
on Windows 10.
It was implemented in psmgr.c but in a recursive way. That implementation
is replaced, in the NameToOrdinal() helper, by the better non-recursive one
found in the MiLocateExportName() and MiFindExportedRoutineByName() functions.
This NameToOrdinal() helper is then called in lieu of the duplicated code
in MiLocateExportName() and MiFindExportedRoutineByName(). In addition,
one block of code in MiSnapThunk() is simplified in a similar manner.
Follow-up to #5610.
- Add _EnsureWriteBag, _PruneMRUTree, _GetMRUSize and
_GetMRUSlots helper functions.
- Add code into _GetMRUSlot, _FindNearestInheritBag, and Write.
- Add CLSID_MruPidlList and IID_IMruPidlList definitions into
<shlguid_undoc.h>.
- Add IMruPidlList interface into <shlobj_undoc.h>.
CORE-9283
- Don't forget to release RTL_RELATIVE_NAME_U before return
- Ignore lpSearchFilter correctly as on Windows
Fixes 6 failures in kernel32:FindFiles test in LiveCD.
CORE-19061
Following PR #5571 (commit 2d53e953c), it became apparent that the
management of the status-bar when showing the menu hints could be
simplified further.
Use "simple-text" status-bar display mode when showing menu hints.
The original status-bar panes state is "remembered" and are automatically
restored when the "simple-text" mode is disabled.
Previously it was in cpprt, which is a support library for C++, containing functions that are not exported by msvcrt. But since Vista __CxxFrameHandler3 is exported by msvcrt. Therefore move it to crt, and to satisfy pre-Vista configurations, also add it to msvcrtex.
Use two longs instead of one for the first parameter of EngCreateBitmap export. Make it same as win32k export.
MSDN documentation says that 1st parameter is SIZEL (SIZE) structure, which actually contains 2 longs inside. Sice it is passed by value, it needs to take enough memory when export in dxgthk and redirect to win32k (since it's actually a win32k function).
Fixes the compilation of our dxg.sys when calling dxgthk!EngCreateBitmap from it.
Found during my DirectX investigations.
mkisofs and its components uses K&R-style function definitions
to support very old compilers. Modern compilers consider K&R syntax
to be deprecated. Clang therefore emits a large number of warnings
over this.
Follow-up to #5590.
- Add CViewStatePropertyBag class.
- Add SHGetViewStatePropertyBag definition.
- Add FreeViewStatePropertyBagCache function and
use it in DllMain to free the cache.
CORE-9283
Object ACEs are supported starting from Revision 4, the current code checks
if the revision is above Revision 4. An Object ACE has to be strictly set on that revision,
whereas Object ACLs can be of any revision starting from ACL_REVISION4.
Write the necessary ACL validation code for ACEs whose types are ACCESS_ALLOWED_OBJECT_ACE_TYPE
or ACCESS_DENIED_OBJECT_ACE_TYPE. This ensures each created object type ACL has valid ACE
contents.
ACCESS_DENIED_ACE_TYPE, ACCESS_ALLOWED_ACE_TYPE, SYSTEM_AUDIT_ACE_TYPE and
SYSTEM_ALARM_ACE_TYPE belong to the same commonly internal ACE type, aka KNOWN_ACE,
as each of these ACEs have the same structure field offsets.
The only difference are ACCESS_DENIED_OBJECT_ACE_TYPE and ACCESS_ALLOWED_OBJECT_ACE_TYPE
as they have their own internal ACE type variant, the KNOWN_OBJECT_ACE structure.
The general guideline is that public ACE structure variants have to be used elsehwere
such as in UM whilst the kernel has to use the internal known ACE type variants when possible.
- Implement SepDenyAccessObjectTypeResultList, SepAllowAccessObjectTypeResultList,
SepDenyAccessObjectTypeList and SepAllowAccessObjectTypeList. These routines will
be used to grant or deny access to sub-objects of an object in the list.
- Refactor SepAnalyzeAcesFromDacl and SepAccessCheck to accomodate the newly
implemented access check by type mechanism.
- SepAccessCheck will now be SepAccessCheckWorker, a worker helper function that further
abstracts the access check mechanism in the kernel. Whereas the SepAccessCheck name will be
used as a centralized function used by the access check NT system calls.
- Deprecate SepGetSDOwner and SepGetSDGroup in favor of SepGetOwnerFromDescriptor and
SepGetGroupFromDescriptor. The former functions were buggy as they might potentially
return garbage data if either the owner or group were passed as NULL to a security
descriptor, hence a second chance exception fault. This was caught when writing tests
for NtAccessCheckByType.
- Shorten the debug prints by removing the name of the functions, the person who reads
the debugger output has to look at the source code anyway.
This implements various private kernel routines for object type list management
needed for access check code infrastructure. In addition, update the code documentation
and add missing comments.
This function will dump all the access status and granted access rights
of each object list of a list whenever an access check by type (or by type
result list) fails. This is for debugging purposes.
OBJECT_TYPE_LIST_INTERNAL will serve as an internal kernel data structure
to hold validated object type contents that are copied from UM.
The difference between the public and the internal one is that the internal structure has
an additional member for access check rights that have been granted on each
object element in the list.
The newly updated SAL2 annotations reflect those from Process Hacker.
Also these syscalls must have their function's status code checked, as
most of other Native syscalls have them checked.
* [KMTEST:TcpIp] Use 10 second timeout value instead of INFINITE
On x64 the test sometimes fails to connect and then times out on the testbot, causing the system to be rebooted.
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
I just can't stand that whitespace-diff at those 2 if-conditions any longer,
which was introduced into co_WinPosSetWindowPos() by
0.4.13-dev-8-g cfdf36e442
Everytime I port something back, I don't know where to put that diff temporarily.
And I don't want to make the older branches worse as well.
So finally squeeze it out at right-hand-side in master head.
Currently ReactOS' winsock2 implementation lacks of non-blocking sockets support for recv() apicall, this causes that applications that make use of this feature can lead to unexpected behaviors, one of them is Nginx web server, which uses non-blocking sockets when serving pages through Https protocol.
CORE-14486
It also brings us significantly closer in master head to running Firefox 52, Mypal 29.3.0 and New Moon 28 browser, where the latter allows to connect to mattermost from within ReactOS.
In master head an additional reg file is needed to stop us from exporting specific NT6+ APIs, but in older releases all that should work out of the box with this brilliant patch.
Co-authored-by: Julio Carchi Ruiz <julcar@informaticos.com>
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
Implement NTFS boot sector that loads FreeLdr from a NTFS partition.
CORE-17474
- Able to find/parse root directory;
- Handle fixups in FILE MFT record;
- Implement directory tree search;
- Implement loading found file from disk;
- Handle fixups in INDX records;
- Fail if compressed or sparse;
- Attempt to support 64-bit disks.
Some TO-DOs for later:
- Handle "weird" NTFS partition with uncommon sector sizes / sectors per cluster / sectors per index record;
- Better implementation for file loading;
- 64-bit LCN support.
This works similarly to how our shell stores its settings from a software design standpoint.
- Add settings.cpp file and ShellSettings structure to load and save settings.
- Add a registry value to hivedef.inf for the locked toolbar state.
This prevents a bug where the associated registry key cannot be opened or saved to.
- Add new BWM_SETTINGCHANGE window message to refresh the UI on setting changes
and send it to every open window when saving settings to the registry.
- Add new BWM_GETSETTINGSPTR window message to share the shellbrowser settings
structure pointer with child windows and toolbars.
When creating a new process the monster function CreateProcessInternalW calls BaseInitializeContext to set up the context for the initial thread. One of the parameters is the PEB pointer. Instead of passing the pointer to the newly created process' PEB, the function was passing it's own PEB address, leading to test failures. How this is not an issue otherwise is a mystery to be resolved by someone else.
Also remove ros_skip_flaky marks in kernel32_winetest:process (yes, flaky, because sometimes the PEB addresses actually match)
IS_SYSTEM_MENU():
"moved" to ntuser on 6dfa71c (r68904).
IS_SYSTEM_POPUP():
uselessly added on 6fc29cc (r8195).
IS_BITMAP_ITEM():
uses removed on 07b6ddc (r23221).
uselessly copied to ntuser on 6dfa71c (r68904).
GitHub is starting to discontinue Actions V2 (the date was postponed).
Once they enforce Actions V3, builds will likely fail to run, so it's
better to change this sooner rather than later.
- Update GitHub Actions to V3
- Replace deprecated set-output with $GITHUB_OUTPUT
This also fixes the warnings on the builds/artifacts page.
Create kernel32_vista_static library and link both kernel32_vista and kernel32 to it.
Export some vista functions from kernel32.
Export BaseProcessInitPostImport for Vista+, too, because ntdll needs to dynamically link to it.
Make sure RtlRemovePrivileges gets compiled, when DLL_EXPORT_VERSION is 0x600+
Enable all existing functions from rtl_vista.
Hack CsrNewThread export to exist on later versions, too
- Simplify duplicated code by having one EnumFiles() function using
callbacks to perform actual action on enumerated files.
PrintAttribute() and ChangeAttribute() duplicate their functionality,
except for the actual difference of displaying the file attributes vs.
changing them.
Instead, move that per-file action into two callbacks, create a file
enumerator function that contains the common functionality, and make
it call the callback passed in parameter to it.
- Reparse points can be encountered during enumeration. In this case,
don't try to go into too many reparse-point levels (maximum two).
- Verify that paths/file names concatenation don't overflow (with the
StringCch* functions returning an error), as this could cause an
infinite loop in case of recursive-enumeration, and the position where
the new path part would be appended turns out to be just at the end
of the buffer.
- Add ImageModel::IsBlackAndWhite and ImageModel::PushBlackAndWhite
helper functions.
- Add CAttributesDialog::m_bBlackAndWhite.
- If IDD_ATTRIBUTESRB4 is checked, then make
the bitmap black and white.
- Add IDS_LOSECOLOR to show message.
CORE-19094
The infoPtr->marqueeRect structure is not currently initialized before the
marquee highlight sequence starts, resulting in the RECT having initial
coordinates of (0,0)-(0,0). These coordinates cause the first item in
the listview control to be identified as being within the range of the
marqueeRect's coordinates.
That item is then set to LVIS_SELECTED even though it is not part of the
marquee selection.
Wine commit: daf95aaadf3a59f0ccc129a853327417b5e4f07c
author: Hugh McMaster <hugh.mcmaster@outlook.com>
Mon, 26 Apr 2021 10:59:51 +0000 (20:59 +1000)
CORE-19092
Fixes the behavior of the SPI_SETFONTSMOOTHING system parameter. This also
fixes a bug when trying to select "Use the following method to smooth edges
of screen fonts" in desk.cpl.
Instead of checking if uiParam is equal to two, treat uiParam as a Boolean
that sets font smoothing on or off. This is the correct behavior according
to Microsoft documentation.
Use SpiStoreSzInt method instead of SpiStoreSz to store the value in the registry.
CORE-11698, CORE-15369
Allows a user to set the icon size and show or hide the desktop button in
the taskbar using the taskbar properties menu. After applying these changes,
the taskbar updates and resizes without requiring a restart.
- This PR moves the 'Notification Area' section into its own separate tab.
This allows us to include more options for users without increasing the
size of the window. It is also very similar to the Windows Vista taskbar
properties menu.
- Some minor changes to allow the taskbar to refresh its view when the icon
size or show desktop button setting changes.
Some datagram related dispatcher function types (like PFN_WSK_SEND_TO)
were used before they were declared. This patch moves the use after
the definition.
- Return TRUE on WM_INITDIALOG handling to set focus.
- Check if the radiobutton is checked on the radiobutton action
(considering BN_SETFOCUS etc.).
CORE-18011
- Add OpenMailer function.
- Add IDS_CANTSENDMAIL.
- Send a mail by using mapi32!MAPISendMail/W.
- Extend SaveDIBToFile function by adding a
parameter.
CORE-19094
Follow-up to #5531. These two functions are necessary for INI file property bag support.
- Implement SHGetIniStringW and SHSetIniStringW.
- Strengthen SHPropertyBag testcase of shlwapi_apitest.
CORE-9283
- Rewrite CImageDx to reduce improper dependency with CImage.
- Check if the filename extension is supported before saving the files.
- Delete deprecated functions in CImage.
CORE-19094
bmBits is only used and assigned on output. It points (holds the address)
to the array of DIB bit values. The "Bits" parameter is however a pointer
to a variable that will receive the address of that array.
So it makes no sense to initially assign bmBits to the value of the Bits
parameter...
In particular, for a given platform (x86, AMD64...) its definition
depends for uniprocessor vs. multiprocessor NT kernel/HAL (controlled
by the CONFIG_SMP define).
Regarding the ASM-generated headers (from asm/ksx.template.h), since
they are generated once for a given platform, and since UP/MP NT builds
are generated at the same time, these headers need to contain both
SYNCH_LEVEL definitions controlled by CONFIG_SMP, instead of a fixed
value. Therefore we need to employ the geninc RAW(...) construct.
[NDK:X86] Add missing x86 CLOCK1_LEVEL and POWER_LEVEL definitions.
- If the source and destination of copying file are on the same directory,
then enable FOF_RENAMEONCOLLISION flag. End if.
- Don't show error message IDS_COPYERRORSUBFOLDER or
IDS_MOVEERRORSUBFOLDER if the source and the destination are the same.
CORE-18599
Follow-up to #5511.
- Add CRegPropertyBag class.
- Implement SHCreatePropertyBagOnRegKey function by using CRegPropertyBag.
- Strengthen SHPropertyBag testcase in shlwapi_apitest.
CORE-9283
Ensure that CMAKE_ASM16_COMPILER is 32-bit MASM.
It is used only for compiling 16-bit x86 ASM code on non-x86 builds.
Original patch by serrox. CORE-10452, CORE-17604
Co-authored-by: Sergey Chernov <serrox@ya.ru>
- Fix the crash on opening/saving file.
- To get the filename extension info from CODECs, we have to keep gdiplus.dll loaded.
- The perfect fix will take time.
CORE-19093, CORE-19094
- Implement SheRemoveQuotesA and SheRemoveQuotesW functions.
- Add She testcase into shell32_apitest.
- Add SheRemoveQuotesA/W into <undocshell.h>.
CORE-9277
The previous version resolved the path of the parent then did logic
assuming simple pidls. This now resolves each source directly.
This change addresses a longstanding TODO in copying and moving to shell folders.
It's a simple change, but it removes a bit of code and makes things simpler.
Corresponding Wine PR: https://gitlab.winehq.org/wine/wine/-/merge_requests/3360
New regression test for shell32!GetDisplayNameOf, showing that the return
value of the function will be 'S_FALSE' when the first argument is NULL.
Also, the returned STRRET structure data is not modified by this call.
CORE-18841
SHLimitInputCombo function sets limits on valid characters for a combobox control.
This function works like SHLimitInputEdit, but the target is a combobox instead of a textbox.
CORE-9277
When using large taskbar icon:
- Increase the padding around system tray icons.
- Push the clock text further to the right, increasing the left padding
between the clock and notification icons.
This matches Windows 7 shell behavior.
- Correct the spacing for the clock area, in the case when bPreferDate is
enabled, only two lines are visible, and the day of the week is shorter
than the date.
CORE-11698
Use the shell about dialog for solitaire and spider solitaire.
This increases visual consistency throughout the operating system
and matches the behavior of the game from Windows XP.
- Use the shell about dialog instead of a plain MessageBox.
- Since the shell about dialog can only handle two lines of text,
shorten the message dialog text to two lines.
- _WIN32_WINNT had wrong value to do workaround on Vista+ RegGetValueW.
- Do #undef and #define _WIN32_WINNT _WIN32_WINNT_VISTA in assoc.c.
- Delete _WIN32_WINNT hack in CMakeLists.txt.
CORE-9283
I intend to port back the combined work of Thomas Faber and Serge Gautherie in context of CORE 14271.
Both developers fixed wrong retval evaluations for SeSinglePrivilegeCheck() and RtlCreateUnicodeString().
Both functions do return a BOOLEAN, and therefore using NTSTATUS() on them is wrong.
Those bugs have been fixed at multiple places. That is long gone.
But Serge fixed his locations a bit more elegantly, without the need for additional variables.
Therefore this addendum adapts a few of Thomas locations to the improved Serge-ified style.
Yes: I intentionally used a space instead of a minus after the mentioned CORE 14271,
as I don't want that pure stylistic addendum to be linked with the initial ticket anymore.
That would be overkill.
Add _getAllEncoders and _getAllDecoders helper functions and use them
in GetImporterFilterString, GetExporterFilterString, FileTypeFromExtension
and GetClsidFromFileType functions.
CORE-18867, CORE-19008
transport calls to LibTCPConnect that suffer certain early failures
like parameter errors or early route lookup failures return without
initializing the pcb.
In order to avoid later BSOD's this change clears the
ConnectionRequest bucket in those cases.
* [PIFMGR] Optimize png images
- Lossless optimization with `pngslim`. Saves ~50%.
- Restricted to RGBA color mode (‘c6’), for maximum compatibility at the cost of some compression.
* [ROSAPPS] Optimize png image
- Lossless optimization with `pngslim`. Saves ~10%.
* [MSTSC] Optimize png image
- Lossless optimization with `pngslim`. Saves ~56%.
- Restricted to RGBA color mode (‘c6’), for maximum compatibility at the cost of some compression.
* [Themes] Optimize png image
- Lossless optimization with `pngslim`. Saves ~20%.
- Restricted to RGB color mode (‘c2’), for maximum compatibility.
The function updates the entry in the section page table and updates the section association rmaps for it. In the page-in path, when the new section association is set before the entry is updated, a concurrent attempt to unmap the page would find an inconsistent entry, where there is an rmap, but the section page table entry is still an MM_WAIT_ENTRY.
MmGetSectionAssociation races with _MmSetPageEntrySectionSegment without sharing a lock. So we need to hold the PFN lock, until we have referenced the section segment found in the RMAP. This prevents that a section segment, which still has associated RMAPs from being deleted behind our back.
These are used in the paging path, when the page is currently in the process of being read from or written to the disk. While YieldProcessor() provides the chance to switch context to the other paging thread, it only does so, once the current thread's quantum has expired. On a single CPU system this effectively leads to busy waiting for the rest of the quantum. On SMP systems this could succeed earlier, thus reducing latency, but it would still contribute to high CPU usage, while waiting for the IO operation to complete, which is not what we want.
Using KeDelayExecutionThread() will instantly allow another thread to run, providing enough time to complete the IO operation.
- Implement SHPropertyBag_ReadBSTR, SHPropertyBag_ReadStr, SHPropertyBag_ReadPOINTL,
SHPropertyBag_ReadPOINTS, and SHPropertyBag_ReadRECTL functions.
- Add link to oleaut32 in shlwapi_apitest.
CORE-9283
Add a string pointer local variable, assign it and operate on it.
This should eliminate an exception and make LsapIsLocalComputer()
function operate correctly.
CORE-18996
Stop storing and setting window positions from the taskbar and rely
on the window's existing position instead. Partial revert of e6bced7a35.
Windows are now correctly positioned when being restored from the taskbar.
This also fixes an issue where minimizing and opening Task Manager causes
the window to become blank when running our shell in Windows Server 2003.
CORE-19055 CORE-13895 CORE-18350
- Add VariantChangeTypeForRead helper function.
- Implement SHPropertyBag_ReadType, SHPropertyBag_ReadBOOL, SHPropertyBag_ReadBOOLOld, SHPropertyBag_ReadSHORT,
SHPropertyBag_ReadLONG, and SHPropertyBag_ReadDWORD functions.
- SHPropertyBag_ReadInt is an alias to SHPropertyBag_ReadLONG.
CORE-9283
- Implement SHPropertyBag_Delete, SHPropertyBag_WritePOINTL, SHPropertyBag_WritePOINTS, and SHPropertyBag_WriteRECTL functions.
- SHPropertyBag_WriteInt is an alias to SHPropertyBag_WriteLONG.
- Modify shlwapi.spec.
- Modify shlwapi_undoc.h.
- Add SHPropertyBag testcase to shlwapi_apitest.exe.
CORE-9283
- Add points regarding real name and e-mail requirements
- Replace old IRC links with the chat references
- Update PR management guidelines accordingly
- Use HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\TaskbarSmallIcons
registry key to store the icon size setting for the taskbar.
- If the registry value is missing, small icons will be used by default.
- If the registry value is set to 1, it will also use small icons.
- Only if the value exists and is set to 0 it will use large icons. This allows us
to use the same registry value as Windows 7 explorer, while also keeping
the taskbar icons small in most cases, especially running the shell
on unmodified Windows Server 2003.
CORE-11698
- Set `HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CabinetState\FullPath` to 0 by default.
Adding this registry value also enables the "Display the full path in the title bar" option in our folder options window.
- Query the same registry key when the file explorer is started to determine whether to use the full path or the display name in the window title.
CORE-19046 CORE-18904
- Add Internet icon on Desktop. You can hide/show
the icon from Desktop's customization.
- Modify "HKCR\CLSID\%CLSID_Internet%" registry key.
- Add IDS_INTERNET and IDS_INTERNET_DESCRITION into ieframe.dll.
- Modify folders/CDesktopFolder.cpp and folders/CRegFolder.cpp to add the icon.
CORE-18625
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
Co-authored-by: Joachim Henze <joachim.henze@reactos.org>
This fixes 'Attempt to free an invalid HEAP address' error. CORE-18841
Confirmed by running new tests written by Mark Jansen, showing that
previous behavior was wrong. While here, also fix a typographical error.
New ReactOS can zip/unzip files and folders in UTF-8 filenames.
You can also choose the codepage of filenames to zip/unzip via
the ZipCodePage / UnZipCodePage registry values on the registry
key HKEY_CURRENT_USER\Software\ReactOS.
Windows 8 or later also support UTF-8 zipped folders.
You can also use 3rd party software to zip/unzip in older Windows.
- Use <atlconv.h> for string conversion.
- Use zipOpenNewFileInZip4_64 instead of zipOpenNewFileInZip3_64,
and then add MINIZIP_UTF8_FLAG flag.
- Set the filenames in UTF-8 by using CP_UTF8 codepage.
- Codepage is user selectable via registry settings.
CORE-16668
This will be needed for compatibility with x86 Windows Vista/7 videoprt.sys builds.
Might be also useful in future for platforms (x86 , ...) where V86 mode is not available or buggy.
CORE-11954, CORE-18185
- Add _ILGetDriveType helper function.
- Use _ILGetDrive and GetDriveType functions to determine the drive type.
- If it was a CD-ROM drive, then remove SFGAO_CANRENAME flag.
CORE-18272
- Extend some Ansi strings to Wide strings.
- Check the UTF-8 flag (1 << 11). If UTF-8, then use CP_UTF8.
- s/LPCWSTR/PCWSTR/.
- s/LPWSTR/PWSTR/.
CORE-16668
- Use proper window styles when creating status bar window.
- Specify WS_VISIBLE style only when status bar display is enabled.
- Use ::CreateWindowExW() with a global namespace scope operator.
- Fix some magic constants.
CORE-19027
The "dir /w" command didn't look good due to unaligned columns.
- Add sdk/include/reactos/cjkcode.h header file.
- Add ConGetTextWidthA/W helper functions.
- Add base/shell/cmd/wcwidth.c to implement ConGetTextWidthW.
- Use ConGetTextWidth in DirPrintWideList function.
- Adjust some STRING_DIR_HELP5, STRING_DIR_HELP6 and STRING_DIR_HELP8 resource strings to make the column aligned.
CORE-17591
All ordinals > 128 regressed by
0.4.15-dev-305-g dd7fb63cd1
and were off-by-one compared to 2k3sp2 and the ros-before-state.
Now all 684 ordinals seem to be fine again.
Adding the stub might cost a few bytes unfortunately.
Extracted from the pci.ids database at https://pci-ids.ucw.cz/ from 2023-06-19 03:15:02.
Maintained by Albert Pool, Martin Mares, and other volunteers from the PCI ID Project.
This allows to somewhat reduce their size, and the resulting size
of the generated hal.dll file.
pci_classes.ids
Before: 6,207 bytes
After : 5,968 bytes
Reduction: 239 bytes --> 4%
pci_vendors.ids
Before: 1,370,248 bytes
After : 1,334,622 bytes
Reduction: 35,626 bytes --> 2.6%
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
CORE-8394
These caused the "Ignore-next-mouse-event" mechanism of the console
(used e.g. in QuickEdit mode for not triggering the appearance of the
context menu, etc.) to not work.
Please note that these buggy events, that arise when testing ReactOS
in VirtualBox with Mouse Integration is enabled, do not show up when
running instead Windows (2003, ...) in the same configured VM.
Addendum to commits ac51557 (r63792) and 33d8a4b (r67218).
Improved fix for the one reported in PR #5406 by contributor 'whindsaks',
as it keeps the separation between the flag that manages the working-around
of the bug, and the other flag that is used for ignoring the genuine next
mouse event that follows mouse-button-down events.
We do use the birth year 1996 instead of 1998
within our msgina pictures already,
and also within the [SDK] for autogenerated file-info.
Since SHELL32 IDD_ABOUT is used by many applications it makes sense to harmonize with that.
- Fix IRP handling, add missing IRP handlers
- Specify the device name for DO
- The legacy IRQ descriptor is edge-triggered
- Improve pool tagging
- Place the PNP code in a pageable section
CORE-17256
This should be performed early enough before CM initialization,
but after the TSC has been initialized and calibrated by HAL.
Based on existing i386 kiinit code. CORE-17971 CORE-14922
Enable the explorer status bar by default, which
the vast majority of our community voted for.
Set `HKCU\Software\Microsoft\Internet Explorer\Main\StatusBarOther`
to 1 in hivedef.inf. This will show the status bar by default.
CORE-19028 CORE-19010
Only done in our own code, not in 3rd-party or in PSDK headers
(official ones also have such typos in defines...)
(NOTE: apparent "Uknown" typo in dll/cpl/sysdm/smbios.c is on-purpose:
typo by the manufacturer.)
- Implement a basic command interpreter.
- Add basic support for helper dlls and contexts.
- Add interactive help system with context support.
Everything is still under construction and subject to change.
Implement IoConnectInterruptEx() for CONNECT_FULLY_SPECIFIED.
This gives ability to load various modern drivers that use IoConnectInterruptEx.
Various drivers work after this change, such as serial.sys MS sample driver when compiled with the reactos tree and many more KMDF drivers from later Windows versions.
Co-authored-by: Victor Perevertkin <victor@perevertkin.ru>
CORE-14096, CORE-8002
Patch based on an earlier fix attempt by Doug Lyons.
It should fix the problem observed by contributor 'whindsaks' in PR #5403.
This bug has always been present since the implementation of this feature
in commit a1eb1f6ba (r40024).
The expansion of %~dpX ennhanced variables used to incorrectly show some
directories in uppercase. For example:
```batch
:: testcmd.cmd
echo '%~dp0'
echo '%~dps0'
echo '%~s0'
```
would show:
```
P:\Documents and Settings\Administrator\Desktop>echo 'P:\Documents and Settings\Administrator\DESKTOP\'
'P:\Documents and Settings\Administrator\DESKTOP\'
P:\Documents and Settings\Administrator\Desktop>echo 'P:\DOCUME~1\ADMINI~1\DESKTOP\'
'P:\DOCUME~1\ADMINI~1\DESKTOP\'
P:\Documents and Settings\Administrator\Desktop>echo 'P:\DOCUME~1\ADMINI~1\DESKTOP\testcmd.cmd'
'P:\DOCUME~1\ADMINI~1\DESKTOP\testcmd.cmd'
```
instead of the correct:
```
P:\Documents and Settings\Administrator\Desktop>echo 'P:\Documents and Settings\Administrator\Desktop\'
'P:\Documents and Settings\Administrator\Desktop\'
P:\Documents and Settings\Administrator\Desktop>echo 'P:\DOCUME~1\ADMINI~1\DESKTOP\'
'P:\DOCUME~1\ADMINI~1\DESKTOP\'
P:\Documents and Settings\Administrator\Desktop>echo 'P:\DOCUME~1\ADMINI~1\DESKTOP\testcmd.cmd'
'P:\DOCUME~1\ADMINI~1\DESKTOP\testcmd.cmd'
```
The reason was a wrong handling of the presence (or absence) of the
"short" path format specifier 's' in those enhanced variables.
In the examples above, the "Desktop" sub-directory has a short-path
name available (because it is in a FAT partition). The short-path name
was used some times also even with the 's' specifier absent.
Co-authored-by: Doug Lyons <douglyons@douglyons.com>
- Convert all modeless dialog boxes back to modal dialog boxes.
- Use WM_TIMER to detect SHIFT key press instead, as you can't
directly intercept messages on modal dialog boxes.
- Remove some unused functions.
Fixes explorer crash on shutdown cancel. CORE-17749
- Add CanBeMinimized helper function to determine whether the window should be minimized.
- Use them in FindEffectiveProc and MinimizeWindowsProc functions.
- Improve the Minimize code.
CORE-18427
Actually I was working on a much bigger commit in the same context for releases/0.4.7
when I realized that related glitches do also affect master head
and also other release-branches in some areas.
- Selecting all in system32 was too slow.
- Make CDefView::UpdateStatusbar function asynchronized by using a thread.
- It makes selecting all very quick.
- Add m_hUpdateStatusbarThread to asynchronize.
CORE-18663
- Improve the test by examining total number of icon groups in files
and by adding more testcases including two new icon files.
- Add new ROS.ico file which has both a normal icon and a PNG one.
- Add tests for explorer.exe and new ROS.ico and sysicon.ico files.
CORE-18897
- 2 Accelerator collisions in tr-TR.rc
- superfluous space in ru-RU.rc IDS_LANGUAGE_MORE_PLACEHOLDER
- typo in uk-UA.rc header
- strip forward slash in IDS_WELCOME_URL
- Add registry key to show the time and date when two lines are available
in the taskbar clock area.
- Keep old behavior when `PreferDateOverWeekday` registry key in
`HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced`
is set to 0 or not present.
When three or more lines are available, the clock will continue to show
the time, day of the week, and the date. When only one line is visible,
the clock will continue to only display the time.
CORE-19018
- FCIDM_SHVIEW_NEW resource string had some problems in localization and keyboard usability.
- Add IDS_NEWITEMFORMAT resource string ("New %s") to format the new file item string.
- Modify CNewMenu::NewItemByNonCommand for IDS_NEWITEMFORMAT.
- FCIDM_SHVIEW_NEW is provided for [New] menu item, so it should have an ampersand.
Add a comment for it and then retry the translation.
CORE-18706
- Avoid the heap in ShowIpStatistics() and ShowIcmpStatistics() to simplify the code,
inspired by how we do it in ShowTcpStatistics() and ShowUdpStatistics() already
- Strip 2 Captain-Obvious-Comments
For the record: Retrieving ICMP-stats and IP-stats does not work properly in ReactOS yet,
neither with nor without my fix. Lower layers are most likely wrong still somehow.
But netstat itself can properly obtain ICMP-stats and IP-stats in Windows already.
- add a pragma once into the header
- order -o options alphabetically also for the global variables, not only in usage-help
- pl-PL.rc: fix wrong alignment of IDS_ETHERNET_THEADER and its data
- pl-PL.rc: also don't pad the data with 2 spaces here in the beginning, which
we don't do in any other locale, and MS netstat also doesn't do that here.
pl-PL.rc most likely got this wrong because it was created while en-US wasn't finished yet.
In C, an inequality comparison between a signed and an unsigned integer
ends up with an unsigned comparison.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52628
Wine commit: 0de8d01b09b1cc7ca34f7ae3890b4a416ff801fe
author: Eric Pouech <eric.pouech@gmail.com>
Wed, 30 Mar 2022 12:57:44 +0000 (14:57 +0200)
committer: Alexandre Julliard <julliard@winehq.org>
Fri, 1 Apr 2022 20:59:40 +0000 (22:59 +0200)
Note that since str is a buffer it cannot be NULL.
Based on Wine commit: 6a4347be371bea544e0d4a81f4cfacd29af18d6e
author: Francois Gouget <fgouget@free.fr>
Mon, 16 Sep 2019 14:01:04 +0000 (16:01 +0200)
committer: Alexandre Julliard <julliard@winehq.org>
Mon, 16 Sep 2019 20:58:42 +0000 (22:58 +0200)
in netstat.c 100% of the calls to
DisplayTableHeader();
have in the exact line beforehand a call to
ConResPuts(StdOut, IDS_ACTIVE_CONNECT);
So let's fuse them.
Also fix a superfluous space in the *.rc files before it will get duplicated
a thousand times.
- Display a correct error message on failing to save a file.
- Don't confuse the main file info and the non-main file info.
- Rename ShowFileLoadError as ShowError, and strengthen and move it to dialogs.cpp.
- Add SetFileInfo and InitializeImage helper functions.
- Add IDS_SAVEERROR resource string.
- Modify SaveDIBToFile, SetBitmapAndInfo, and DoLoadImageFile functions.
CORE-18867
- Fix the garbled characters (a.k.a. mojibake) in some Japanese text files.
- weight will remain 3 unless IS_TEXT_UNICODE_DBCS_LEADBYTE flag is set.
- Strengthen advapi32_apitest IsTextUnicode testcase.
CORE-19016
- Save locked state of the taskbar when toggled using its context menu.
- Save position of the taskbar after dragging it around the desktop.
- Invoke TRAYCMD_LOCK_TASKBAR command when (un)locking the taskbar
by the context menu, instead of duplicating this functionality.
CORE-11621 CORE-16997
When calling 'netstat -abn'
Win 2k3sp2 and XPSP3 do show both: the processes name and the PID.
Contrary Win 7 and Win 8.1 would show only the process name then without the PID.
The newer Windows versions would require you to explicitly pass -o
if you want to see the PID also.
We do follow 2k3sp2 because it is our target. The process name is not of much use
without having the PID as well, especially if multiple processes with the
same name do run on a system, e.g.: multiple 'svchost.exe' processes.
Ros will automatically switch to the Win7-way when newer
Windows versions will be targeted at build-time.
- Strip inconsistent spaces from the spec file.
- iphlpapi_main: Harmonize inconsistent and line-wasting function-comments and fix mixed space-tab-indentation.
- ipstats_reactos.c: Compactify horizontally accordingly to the coding guidelines
I am interested in that code for a backport, so I want it to be well-formatted.
Ftr: IPHLPAPI was *forked* more than a decade ago from Wine.
Therefore no diff ever was guarded within those files whenever we implemented anything here.
KiGetFeatureBits() is now being called in the early boot phase 0
when the Kernel Debugger is not yet initialized, so debug prints
are not available here. Move the debug prints into a new function
and call it at the right time. CORE-18023
Fix CLIENTINFO usermode pointer access once again.
Based on a patch by Michael Fritscher from CORE-10017.
Addendum to 7052282507 (r68702).
CORE-18728 CORE-19014
The function should return the kernel time for the idle thread in the
first argument, and kernel time + user time for the current thread in
the second argument.
Also retrieve the processor number from the cached PRCB instead of
calling KeGetCurrentProcessorNumber() which retrieves the PRCB again
since the processor could switch in-between those calls.
NdisGetCurrentProcessorCounts() function follows the same prototype
which is the correct one.
- Reimplement the Release and Renew functions using GetAdaptersInfo().
- Check for enabled DHCP and connected medium
- Check for already released Lease in the Release function
- Add required messages
Many thanks for Simone Lombardo for pointing to the code needing attention
and providing a working proof-of-concept solution.
CORE-12377
CORE-18084
CORE-13889
The sum of X and width exceeds the X of next element.
So, change the width to <next x> - <current x>.
All affected translations were changed.
CORE-18829
fixes symptom CORE-19005 [NETSTAT] crashes when called with -abnop
and no further argument (protocol name missing).
The crash was a regression of
0.4.11-dev-814-g 2b55073360
also meticulously try to match Windows exact screen output and ERRORLEVEL then
instead of e.g.: simply showing the usage help
which means:
ERRORLEVEL 0 for 'netstat -abnop' and displaying Active-string + table header *but without any sane contents*
ERRORLEVEL 1 for 'netstat -abnop bullshit' and displaying usage help
ERRORLEVEL 0 for 'netstat -abnop tcp' and displaying Active-string + table header + contents
ERRORLEVEL 0 for 'netstat -abnop udp' and displaying Active-string + table header + contents
while touching the file do also some unrelated whitespace tweaks.
* [ADVAPI32_APITEST] Add new RegCreateKeyEx tests
* Remove trailing spaces.
* Initialize SECURITY_ATTRIBUTES sa with zeroes.
Add a set of tests for RegCreateKeyExW and -A.
Created to prove the correctness of the already merged PR (#5230)
JIRA issue: CORE-15471
Besides creating the PDO and device node for it, it has to set up the
necessary registry keys, and register PDO at PnP root driver properly.
CORE-18989
The root device object is in fact a PDO and a FDO at the same time. Thus
there is no need in creating two device objects here, one is enough.
This commit also removes the explicit device extension for the root DO,
because the only reason it existed is to distinguish the root driver's
FDO from its PDOs. This can easily be done by comparing with
IopRootDeviceNode.
Also collect some unused garbage while we are here.
- Use `HKCU\Software\Microsoft\Internet Explorer\Main\StatusBarOther` registry key for the setting persistence.
- Set its value to 1 when the status bar is visible, and to 0 when the status bar is hidden.
- Query it when the file browser is initialized to set the correct view state for the status bar.
- Set the default state of the status bar to hidden if the registry key does not exist, matching the behavior of Windows Server 2003.
CORE-19010
CORE-19011
Fix a "bug" I introduced in commit 61012eb54.
VideoPortGetAccessRanges() expects the caller to specify at least the
total number of ranges the hardware exposes, otherwise it fails with
ERROR_MORE_DATA. (Tested also with the help of Windows' videoprt.sys.)
On real original XBOX there are three:
```
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV2A [XGPU] [10de:02a0] (rev a1)
Subsystem: Unknown [0000:0000]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 03
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at 00000000 (32-bit, prefetchable) [size=512K]
```
Thanks to Stanislav and Daniel for tests on the real XBOX.
These are specified for releasing the hardware resources previously
acquired by either a previous call to VideoPortVerifyAccessRanges()
or a call to VideoPortGetAccessRanges().
- Add missing mnemonic keys
- Remove unneeded mnemonic keys
- Fix some translated strings being too long
- Fix mispositioned elements
- Reposition overlapping elements
Validated the changes with Resource Hacker. CORE-18867
@@ -63,13 +63,19 @@ Our commit style is defined in a __[commit template]__. Use it as a reference or
### Rules and Recommendations
- *Use your __real name__ and __real email__.* We do not accept anonymous contributions!
- *Use your __real name__ and __real email__.* We do not accept anonymous code contributions!
- Every commit that changes code or translations should have author's full legal name (in latin letters, diacritics allowed).
- It's recommended to have the same full name set in GitHub profile (in the [Name field here][GitHub Profile Settings]) that matches one specified in commits.
- There is an exception for media changes, such as changes of art (wallpapers, themes, icons, sounds) and out-of-code documentation.
- In these specific cases it's allowed to use a nickname or alias as author's name, and it's recommended to have the same name set in GitHub profile (in the [Name field here][GitHub Profile Settings]) matching one specified in commits.
- In any case the author must use a real e-mail address, this includes git commits (`user.email` setting) and GitHub [e-mail settings][GitHub Email Settings] - the checkbox "Keep my email addresses private" must be unchecked there.
- In order to *keep your privacy*, select appropriate "Primary email address" that will be applied to your commits in GitHub [e-mail settings][GitHub Email Settings].
- *Ensure your contribution is properly described.* Include the relevant issue number if applicable.
- *Put only related changes.* It will make reviewing easier as the reviewer needs to recall less information about the existing source code that is changed.
- *Search for similar pull requests/patches before submitting.* It may be that a similar pull request or issue was opened previously. Comment and review on that one instead.
- *Keep your contribution small and focused on the topic.* It can be tempting to fix existing issues as you come across them while reading the source code. Resist the temptation and put in a note in the source code instead, or (even better) put the issue in the issue tracking system.
- *Respect our __[Coding Style]__ and __[Programming Guidelines]__.*
- *Do not be afraid to ask questions.* Ask our developers on JIRA or [IRC] channel.
- *Do not be afraid to ask questions.* Ask our developers in the [chat].
To amend your commit with your name and e-mail (in any case you've forgot to set your name/e-mail) please take a look at this [guide](https://reactos.org/wiki/ReactOS_Git_For_Dummies#Amending_your_commit_with_name.2FE-mail). To set your name/e-mail globally for future commits that you push, [read this](https://reactos.org/wiki/ReactOS_Git_For_Dummies#Assign_commits_with_your_name_.26_E-mail_automatically).
@@ -79,7 +85,7 @@ Finding a good project to start with can be a challenge, because when starting o
- Find a test that fails, and try to make it succeed: <https://reactos.org/testman/>
- Look around in JIRA, and if you have problems finding nice projects to start with, there is a label for this: <https://jira.reactos.org/issues/?jql=labels%20%3D%20starter-project>
- Ask for help on [IRC]
- Ask for help in the [chat]
- Additionally, there are some tests that cause crashes/hangs, but these might be slightly harder: <https://jira.reactos.org/browse/ROSTESTS-125>
@@ -14,3 +14,17 @@ In addition, in order to avoid coming off as rude to helpful contributors, pleas
- Asking the contributor to do unrelated work
- Closing without providing a reason
- Merging with the intention to rewrite that code soon after
Before merging a PR, make sure it follows the [contributing rules](CONTRIBUTING.md#rules-and-recommendations), but more importantly:
- Make sure the author has specified a real e-mail in all PR commits
- If PR contains code or translations, make sure the author has not specified a nickname or alias, but a full legal name in all PR commits
- If PR contains media (wallpapers, themes, icons, sounds) or out-of-code documentation, make sure the author has specified the name or alias in all PR commits
- If PR contains mixed code with media changes, handle it as PR with code
- Important notes before using "Squash and merge" strategy on a PR:
- Make sure the author's name in GitHub profile matches one in commits. If this is not the case, ask the author to set it accordingly.
- If the author does not want to set the name in GitHub profile:
- "no squash merge" label needs to be added to a PR.
- Make sure every commit message is formatted correctly as in [.gitmessage](https://github.com/reactos/reactos/blob/master/.gitmessage).
- Finally in this case a PR has to be merged either using "Rebase and merge" strategy or manually.
- By pressing "Squash and merge" button in a PR you can make sure the author does not use no-reply e-mail -
under the commit message there will be a text label saying: `This commit will be authored by <address@email.com>`
IDS_LICENSE "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.\r\n\r\nThis program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.\r\n\r\nYou should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA."
IDS_LICENSE "本プログラムはフリーソフトウェアです。フリーソフトウェア財団が発行した GNU 一般公衆利用許諾契約書のバージョン2、またはそれ以降のバージョン（任意選択）の条件の下で再配布、または改変することができます。\r\n\r\n本プログラムは、有用であることを期待して配布されていますが、商品性や特定目的への適合性についての暗黙の保証もなく、いかなる保証もありません。詳細は GNU 一般公衆利用許諾契約書をご覧ください。\r\n\r\nあなたはこのプログラムとともに GNU 一般公衆利用許諾書のコピーを受け取っているはずです。そうでない場合は、フリーソフトウェア財団（Free Software Foundation, Inc, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA）までご連絡ください。"
IDS_ERROR_ISINSTALLED "This font is already installed!"
IDS_ERROR_FONTCPY "Failed to copy the font file!"
IDS_ERROR_OPENKEY "Failed to open the fonts key!"
IDS_ERROR_OPENKEY "Failed to open the fonts registry key!"
IDS_ERROR_REGISTER "Failed to register the new font!"
IDS_SUCCESS "Success"
IDS_COMPLETED "Font installation completed."
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
